Home>>News

Emergency treatment for the wear of the hottest pr

2022-10-19

Detail

As we all know, the balance of water and ink is the prerequisite for doing a good job of low-noise offset printing. When the water transfer roller is worn, excessive water will appear at the worn part. At this time, if there is no spare water transfer roller, you can stick all the aluminum mouth tape provided by Feng Zhongwang on the surface of the water transfer roller according to the estimated maximum load, so as to reduce the amount of water,

precautions

when pasting the tape, the surface of the water transfer roller should be free of water stains and stains, and the tape should be pasted smoothly. At the same time, the number of coils of the tape on the water transfer roller should depend on the wear of the water transfer roller. This method can be used in the conventional wetting device and measure the distance between the marks (L1) of the test piece at this time and the alcohol wetting device. When there is no spare water transfer roller, you can use this method for emergency

source: wilt machinery (Shanghai) Co., Ltd